The Cel-Fi SOLO Smart Signal Booster is designed to solve mobile coverage problems for voice and data. With up to 100dB of gain, it is the most powerful carrier-grade solution available. The Cel-Fi SOLO covers up to 16,000 ft2 /1,500 m2 of indoor space per system and improves 3G and 4G mobile service by eliminating dead zones and dropped calls.
Cel-Fi products are mobile network approved and fully meets the regulatory requirements in the UK and Ireland. The Cel-Fi commitment is to protect the operator's network, deliver the best in-building mobile performance, and be the easiest solution to install.
Licence exempt and fully meets Ofcom requirements SI 2018/399 (UK) and ComReg S.I.No.283 of 2018 (Ireland)
Quick and easy setup and installation
100 dB max signal gain covering an area 16,000 ft2 / 1,500 m2 per unit
Available for O2, EE, Three, Vodafone and all Mobile Virtual Network Operators
Can easily switch between mobile networks via the Cel-Fi WAVE app
Boosts both 3G and 4G signal coverage simultaneously
Smart Signal Booster with IntelliBoost© Chipset - Unconditionally Network Safe
Remote monitoring and management with the Cel-Fi WAVE app
The system needs to detect a minimum signal outside of the building to operate.
Cel-Fi SOLO Bundle 1 includes: Cel-Fi SOLO Smart Signal Booster 1 x Cel-Fi Whip Antenna 1 x Cel-Fi Patch Antenna 1 x 8m Coax Cable 1 x Wall mounting bracket
Quick Installation: The Cel-Fi SOLO comes with a Cel-Fi Whip Antenna and Cel-Fi Patch Antenna. These can be used to get a system up and running in minutes.
Advanced Installation: If you need a more powerful donor antenna you can connect the Cel-Fi SOLO to an outdoor Wideband Directional Antenna. If you need to get coverage to more areas of your building, you can use Splitters and connect to multiple Server Antennas
Simultaneously supports multiple channels with bandwidths from 5 to 20 MHz Total system relay bandwidth of 60 MHz Relays three (3) channels simultaneously (up to 20 MHz each) Peaceful coexistence with adjacent Wi-Fi (2.4 GHz & 5 GHz), femtocells, and mobile devices Automatic Gain Control (AGC) based on fast real-time echo-cancellation Dynamic gain control always ensures maximum gain, best coverage in ever changing RF environments, without user intervention. Self-organising edge intelligence ensures that Cel-Fi SOLO do not interfere with other indoor wireless products such as Wi-Fi routers, Small Cells, and Distributed Antenna Systems (DAS). High speed Automatic Gain Control ensures that Cel-Fi SOLO are unconditionally network safe and enables more simultaneous calls and higher data speeds.
Activate, Optimize, and Manage Cel-Fi products with the Cel-Fi WAVE App Cel-Fi WAVE is the software application used for registering, setting-up, remotely monitoring, and updating Cel-Fi products. It provides a glance-able view to the state of your Cel-Fi environment and includes: A dashboard overview of all your systems Real-time data and performance metrics Easy activation and registration Operator changeover if you switch your network Software update management Users and group management The Cel-Fi WAVE App is available for iOS, Android, PC and Mac devices.
*This unit supports multiple networks however only one network can be used at a time. The WAVE App can be used to switch between mobile networks.
For customers in Hebrides, Scottish Isles, Highlands and other remote areas in the UK: Due to Ofcom licence exemption rules, it is not permitted to relay 4G only signal. Please check on your service provider's coverage map, entering your postcode, to make sure you have Outdoor 3G Coverage in your area before purchasing. The current checker websites are: EE, Vodafone, O2, Three
Please call free for advice 0800 6122199
The Cel-Fi DUO Signal Booster greatly enhances the 3G and 4G / LTE signal and cellular service, nullifies dead zones and eliminates dropped calls. Its area of coverage and signal gain make it ideal for homes, stores, offices, warehouses and small businesses in general.
Provides 100dB of signal gain, 1,000 times stronger than traditional analogue boosters, which provide 60-70 dB of gain
Creates a bubble of approximately 40 metres of coverage or 13,000 sq. ft. / 1,200 m2, equivalent to 5-10 times larger coverage than most boosters
Boosts both 3G and 4G signal coverage, for EE or Three, and all hosted MVNO under the Network of your choice
Enhances reception and signal strength which result in reduced battery requirements on mobile phones and extended battery life.
Reduces dropped calls and improves voice clarity
No internet broadband required
Cel-Fi DUO is CE and FCC approved. It is legal to use and has been approved for use by mobile operators.
You must have at least one bar of signal somewhere in the building.
With 100dB of gain, the Cel-Fi DUO mobile signal booster will improve cellular service, and reduce your cell phones power requirements to extend its battery life. The Cel-Fi DUO covers up to 13,000 sq. ft. (approximately 1,200 m2) of indoor space per system. Its fully self-contained and self-configuring, requiring no external antennas or wiring. Simply plug it in to boost indoor cellular coverage.
Technical Specifications:
Compatible with: EE, Three and all hosted Networks (3G and 4G)
Support for Band 1 (2100 MHz) and Band 3 (1800 MHz)
Certifications: CE, FCC, RoHS, IC, EAC, R&TTE, EN, SRRC
Power Consumption: Full uplink: 30 Watts / Idle: <20 Watts
Physical Specification: Network Unit: 158.5 x 146 x 59mm (560g) / Coverage Unit: 158.5 x 146 x 59mm (390g)
Electrical & Environmental Requirements: 12 VDC / 0 to 40 Celsius
Specifications
Network Three EE
Product Type Signal Boosters
Window Unit Depth (mm) 144
Window Unit Height (mm) 207
Window Unit Width (mm) 144
Window Unit Weight (g) 900
Please call free for advice 0800 6122199
Nextivity Cel-Fis mobile phone signal boosters strengthen your signal indoors by up to four times, providing clear voice conversations and greater data throughput- theres no need to restrict your mobile conversations to outside. Available in the PRIME for small homes, the DUO for homes and small businesses, the PRO for small to medium enterprises and the QUATRA for medium to large enterprises Cel-Fi UK offers legal mobile phone signal boosters for 3G, 4G and LTE voice and data for all UK mobile networks: O2, Vodafone, Three and EE (and all virtual network operators, e.g. BT, Giffgaff, Virgin Mobile, Sky Mobile etc.). Designed and produced by Nextivity.
Please call free for advice 0800 6122199
Smart Cellular Coverage
Cel-Fi QUATRA is an active DAS hybrid solution for delivering high quality in-building cellar coverage in middleprise venues. It combines the best of active DAS and the Cel-Fi technologies that have been widely adopted by carriers around the world. It operates in off-air mode or can be integrated with carrier small cell equipment and operated in distributed small cell mode, creating a Supercell. Cel-Fi QUATRA can be configured with components, for single or multi-carrier environments.
PLEASE CONTACT US TO ARRANGE A QUOTATION - Call 0800 6122199